How to use tips in life to remove yellow sweat stagnation from clothes?

Sweat stains on clothes
can be washed with a 25% concentration of ammonia water solution. You can also soak the clothes in 3% salt water for a few minutes, rinse them with water, and then wash them with detergent.
Sweat stains on silk, wool and their blended fabrics can be washed off with citric acid. Finally, rinse with clean water. When removing sweat and mildew spots, new stains can be brushed off with a soft brush to remove the surface mold spots, and then wiped off with alcohol.
If the clothes are washed and rinsed in clean water with two glasses of beer, the faded parts can be recolored.
White clothes often turn yellow after wearing them for a long time, so you can soak them in a solution with indigo and rinse them, and the result will be as white as new.
Note
that it cannot be soaked in colored rice washing water to prevent coloring.
Yellowed silk clothes can also be rinsed with lemon juice or rinsed with light citric acid, both of which can remove yellow stains, and finally rinse with water.
The nemesis of clothes stains A good helper for laundry people!!
Cleaning stains of unknown origin on clothes In
daily life, there are often some stains of unknown origin on clothes, and after being found, they can’t remember where they came from, so they often can’t ‘prescribe the right medicine’, so it is more effective to use more general cleaning methods.
1. Stains on white clothes
can be mixed with 4 parts of ammonia, 1 part of soda (sodium carbonate), 2 parts of high-quality white soap, 4 parts of alcohol and 100 parts of water with a concentration of 10%, and after wetting the stain with a cloth dipped in the mixture, wipe until the stain is removed, and then rinse it with clean water.
2. Stains on any fabric
can be wiped with a mixture of 5 parts of ammonia, 3 parts of acetone and 20 parts of alcohol soap with a concentration of 10%. It can also be wiped with a mixture of 1 part alcohol, 1 part ether, and 8 parts pure turpentine with a concentration of 90%.
Cleaning and maintenance of T-shirts
A good T-shirt, it must be soft and elastic, breathable and cool to wear, the whole T-shirt should be turned inward when rinsing, and avoid rubbing the patterned side, try to wash it by hand without using a dryer, and do not pull the neckline when drying clothes to prevent deformation. Remember to wash your clothes carefully when changing seasons, and understand the material when handling clothes, so as not to damage your beloved clothes during the cleaning and ironing process.
Cotton fabrics
1. Vinegar will erode cotton fabrics, so when acidic substances such as juice stain cotton fabrics, it is best to treat them with clean water immediately to prevent stains from staying for too long and difficult to remove.
2. Alkali is not easy to damage cotton fabrics, so you can use a detergent with weak alkaline detergent and strong detergent.
3. Sunlight will cause cotton fabrics to oxidize, and make white cotton fabrics yellow and brittle, some cotton dyes are particularly sensitive to sunlight, and it is easy to lose color when overexposed, especially blue, purple, pink, etc. need to be especially careful to turn over and dry.
4. Light-colored cotton fabric clothes will gradually turn yellow after washing for a long time, you can add detergent to the water and boil it together for 20~30 minutes, and then wash it with water to restore its original appearance.
5. The temperature of the whole ironing cotton fabric should be about 180 degrees, because the cotton material is not easy to iron flat when it is completely dry, it is best to spray some water moderately when ironing the cotton fabric to make the moisture penetrate evenly before ironing, which can get twice the result with half the effort.
Synthetic fibers
Synthetic fibers such as nylon, nylon, polyester, polyester, acrylic, ACRYLIC, and various fibers have different characteristics and different cleaning and maintenance methods.
1. Nylon clothing is not easy to fade but easy to dye, so be sure to separate it from other dark clothes when washing to avoid staining.
2. Use neutral detergent to clean nylon clothes, avoid using hot water, nylon clothes are easy to dry after washing, no need to dry.
3. Use low temperature for ironing nylon clothes, about 140 degrees Celsius or below.
Tips to prevent clothes from fading in summer:
(1) When drying clothes in the anti-sun method, turn the clothes upside down, so that the inside of the clothes should face the sun and the surface of the clothes should be shaded.
(2) When washing artificial fiber clothes with additive methods, add some salt to the water; For high-end clothing, you can add a small amount of alum to the water, which can avoid or reduce the fading of the clothes.
(3) Pickling method When washing colored fabric clothes, add 1~2 tablespoons of vinegar to the detergent to prevent the clothes from fading.
Tips for drying clothes
(1) It is best not to expose clothes to the sun, but to dry them in a cool and ventilated place until they are half dry, and then put them in the weaker sunlight to dry to protect the color and life of the clothes.
(2) Pay attention to the wind direction when drying clothes. Due to the serious air pollution in the city in recent years, especially the downwind part near the factory area, the air often contains a lot of dust, if this phenomenon is ignored, it is easy to make clothes stained with dust and affect the wearing effect.
(3) When drying clothes, do not wring the clothes too dry, but dry them with water, and flatten the placket, collar, sleeves, etc. of the clothes with your hands, so that the clothes will remain flat and not wrinkled.
Preservation and ironing skills
(1) Preservation method
Natural fiber and artificial fiber clothing should be hung and stored.
To avoid causing insects, treat with camphor balls. The camphor ball should be wrapped in a paper bag and separated from the clothes to avoid chemical reaction between the clothes and the camphor ball.
(2) Ironing Skills
A: Preparations before ironing: (irons are divided into upright steam and home-style irons)
1). Start by placing the ironing board on a flat surface.
2) Check if the ironing board is covered with a heat shield.
3) Whether the temperature of the iron is suitable for the material of the garment (refer to the washing sign before ironing)
4) Clearly understand which temperature the garment is suitable for; Most clothes can be used for steam, but steam is not suitable for sticky parts
5) For clothes that are easily reflective (mirrored), use an iron heat shield (or use a cloth to separate it) to make the fibers of the clothes less likely to be damaged.
6) The water storage capacity of the iron should be moderate, not too full, otherwise there will be excess water leaking wet clothes, causing clothes to stain.
7) After the iron enters the water, do not lay it flat, it should be placed slightly upwards, otherwise it will leak.
8) The temperature adjustment of the iron should be adjusted slowly from low temperature to high temperature to the applicable temperature of the garment.
Note: The neat iron should not be ironed in sticky positions, such as the front of the suit, the collar, etc.
B: Common mistakes in ironing:
1) The lapel line of the garment is not ironed correctly (shirt)
2) The reverse placket of the outer garment is not properly ironed
3) There are wrinkles on the top of the sleeves after hanging, mainly because the appropriate sleeve ironing tool is not applied.
4) The trouser bone is not in the center position (the bone position is not aligned during ironing)
C: Precautions after ironing:
1) Pour out all the water in the iron to avoid stains precipitating in the iron for a long time.
2) Remove the iron heat shield.
D: How to remedy burned clothes
1) If the clothes are slightly mirrored (mostly in dark clothes), you can use steam to restore it to normal, if the situation is more serious, you can use a small amount of talcum powder to pounce on the surface of the clothes, and after five minutes, adjust the iron to the steam temperature and iron the clothes with a cloth, and the clothes can be restored to their original appearance.
(Note: When using steam, the iron should not directly touch the clothes, it should be a little away from the clothes, and use steam to spray the mirrored place to directly restore it to normal)